Pivot Safety Gate
Pivot Safety Gate

Safety pallet gate

43200-0

The Pivot Safety Gate, also known as Anti-fall tilting barrier, is a collective security and protection element. Its use is mandatory according to the labour risk prevention regulations. It avoids the people falling while lifting loads to a mezzanine or to any other level.

It works as a rocker: the merchandise is deposited in a position using a forklift and taken away in the other position from inside the mezzanine. This way, one of the railing sides is always closed, avoiding falling to a different level with no need to use harness.

The Pivot Safety Gate is specially designed for its integration with Tecrostar mezzanines and railing, though they can also be placed in a different surface. They are really safe and easy to install.

The dimensions of the maximum load to deposit and the dimensions of the gate itself depend on the model, as shown in the main image.

The Pivot Safety Gate or Anti-fall Tilting Barrier is an ideal protective element to be located in the Mezzanine TXL 32. It is designed to be used in industrial structures. It allows to move heavy loads from the lower surface of the mezzanine to the upper side and vice versa, with a complete safety of movement.

With a capacity for volumes of 57 inch maximum width and a height up to 92 1/2 inch, the Pivot Safety Barrier is the adequate complement for the industrial use of the Mezzanine TXL 32. It prevents the fall risk of the material when the merchandise is stacked, thanks a to a perimeter protection and to the easy opening and closing system it offers.

According to the standards and ergonomics in different workplaces, the Pivot Safety Gate is ideal for easy handling systems. It enables a maximum availability in the workspace, both in spaces with high ceilings and zones with limited height.

The following table summarizes the dimensions of the maximum load that can be deposited and the dimensions of the gate itself, depending on the used model:

 

H1 – Load height (inch)

H2 – Gate height (inch)

Type A

92 1/2

105

Type B

78 1/4

94

Type C

64 1/2

82 3/4

Preview the shipping fees

$1,290

Free shipping for orders over $2000

Faqs

    What does the kit include?

    Tecrostar mezzanines and stairs are supplied with everything you need to install the kit at its maximum surface area or height.

    • All the beams and columns
    • The floor panels
    • All the nuts and bolts
    • Wall anchors
    • Assembly manual
    • Anchors for anchoring the columns to the floor

    Personalised phone or email service from our specialists


    Is the XL range delivered differently?

    There is a slight difference with the rest of the ranges. In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer (maximum mass admitted up to 36t). If there are access restrictions for this kind of trucks, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle. Should you believe it exists any kind of restriction, please contact us.

    The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck do not have back liftgate).

    We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.


    Characteristics of the materials

    Tecrostar products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.

    • The steels used for beams, columns and other components are fit for structural uses with a high yield strength (S235, S275 or S3555, as required). The pieces are manufactured using maximum precision laser cutting, folding and pressing processes. Next a powder coating is applied and they are baked in the oven, offering maximum adhesion and an outstanding finish.
    • Structure hardware grade 8.8
    • Anodized aluminium apt for outdoor use
    • The wood panels used for the mezzanine flooring can be made of European radiata pine plywood or high density structural chipboard. All the boards are tongue and groove on all four sides to prevent faults and unevenness at the joints of the modules.
    • Other wooden components, such as the steps and parts of the handrails, are made from top quality beech.

    TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.

    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados
    detalle acabados