The Stability Bar L is needed when the mezzanine cannot be fixed to 2 or more walls.
The placement of the stability bars and the mezzanine fixations depends on its configuration and on the place the structure is installed. It is necessary to stabilize the mezzanine, as shown in the section below.
The kit consists of 1 bar and 1 clamp to join the stability bar to the pillar. These elements allow the rigid connection of the pillar and the beams.
The K-bracing system (shown in the left) is as safe as the classic cross-bracing system. Moreover, our K- bracing system allows to pass freely underneath the mezzanine.
|Kind of product||Stability kits|
|Which height above the flooring board is needed?||From 82 1/4 to 91 3/4, From 91 3/4 to 111, From 111 to 135|