UNO Hanging bracket
Uno Hanging bracket is made of steel with a maximun load capacity of 220 lb load. Curved, stylish and simple, it can be installed in the two top holes of any of ours mezzanine beams (screws are included).
Reference: 61004-N
The Stability Bar M is needed when the mezzanine cannot be fixed to two or more walls.
The kit consists of 1 bar and 1 clamp to join the stability bar to the pillar. These elements allow the rigid connection of the pillar and the beams.
The K-bracing system is as safe as the classic cross-bracing system. Moreover, it allows to pass freely underneath the mezzanine.
Our product is totally detachable and reusable. Therefore, it can be considered as movable property. This feature, always depending on each country’s current legislation, allows its use and installation with no need for planning permission.
The products can be located indoors and outdoors taking into account some recommendations.
The material will be delivered at street level (curbside delivery) by an external transport company.
Tecro Space S.L. is not responsible of the use or inadequate installation of the product.
Our technical team can facilitate you the task. Send us a sketch with your idea and we will develop 2d or 3d plans in order to see how it will be. Click here to contact us.
We do not currently offer an on-site measurement service. However, we recommend you explore the Mr Assembler website, where you can find assemblers who do offer this service. In addition, their platform allows you to hire an assembly service for the products you need.
You can make aesthetic modifications, but any structural modification non approved by Mezzanines Oniline will be under customer’s responsibility.
No, you don’t. Our products are completely removable and reusable, therefore, they are considered as PERSONAL PROPERTY.
The mezzanines with an industrial usage require neither a building license for their assembly nor meeting the maximum constructed surface limits of the pavillion. As they are removable and hence personal property, they are subject to the same legal regime as the machinery, the racks, the vehicles, etc.
MezzaninesOnline products are manufactured with the most suitable materials for the proposed technical solutions, combining wood, steel and top quality aluminium.
TECRO has earned certification from the AEM, the federation of Spanish materials handling. We have also received a Gold Medal Award of Merit from the INPEX (Invention and New Product Exposition), the top award for innovation at the largest Invention Exposition in the USA.
We might have various models of mezzanine that meet the dimensions you need. In this case, follow these criteria:
1- Load-bearing capacity
2- Maximum span (distance between columns)
3- Beam height
4- Height of the mezzanine above the decking you need
You can increase the surface using the extension kits. Get these kits at the same time as your mezzanine or in the future, when you need more space.
These kits are height-adjustable as well and allow to multiply the surface of our mezzanine.
No, it is not a customised mezzanine but its telescopic design enables an almost customised finish. This system is length, width and height adjustable, achieving the preferred measurements.
The mezzanine can be adjusted from its minimum values to its maximum values at these intervals.
A: adjustable every 4 3/4"
B: adjustable every 3 7/8"
C: adjustable every 3 7/8"
Plasterboard is a low density material, so you can make a closing wall on top of the mezzanine. You can also close the lower part of the mezzanine when mezzanine is indoors. When this closing wall is made in mezzanines installed in the exterior, you should consult Mezzanines Online, since lateral wind load can cause the structure needs stability kits.
No, you can’t. At the moment, our mezzanines are available just for a single height although some customers install them on another existing mezzanine. In that case, the resistance of the existing one should be checked.
It depends on the beam type, we need to calculate the corresponding surface load. For example, a secondary beam TM 15 supports around 1234 lb. You should take into account that if we apply additional loads, a part of the bearing capacity of the beam is being consumed.
If you have any doubt about important additional loads, contact our technical department.
Yes. Provided that the inclination is small, we can use a wedge under the mezzanine columns to level it. If the inclination is too small it might be not necessary at all and the slope might be imperceptible.
Yes, you can because the structure does not to be in full contact with the wall. When the walls are irregular or when you want to work around a fixed object, the boards can be finished off against the wall. These factors must be taken into account:
The total board surface included with the mezzanines only covers the maximum surface area of the mezzanine floor. You can add panels to cover this additional surface.
Yes, it is possible to reduce the height but not to increase the maximum position.
To reduce the height of S and M mezzanines, you can ask the technical department for a type of short column. With their use the telescopic and adjustable system is maintained, but the maximum and minimum positions of the structure are reduced.
Depending on how short the mezzanine needs to be, the customer may have to make a simple cut on these columns.
To reduce the height of L and XL mezzanines, a special cut must be made. You can order this cut from MezzaninesOnline and we will send you a personalized quotation.
At least two adults are required to install a mezzanine, (they do not need to be DIY professionals). It is recommended to use safety equipment such as gloves, boots, etc., to avoid any accidents.
For the mezzanine floors in the L and XL range, a scaffolding or ladder system may be required for work at height and manual or electric lifting equipment for the primary beams, especially if the structure is over 3 m high. All other ranges are easily lifted by hand.
You will need the following tools to install the mezzanines: tape measure, a spanner set for nuts and bolts and a screwdriver (an electric screwdriver makes the job much easier), a spirit level, hammer, drill and a cutting tool for the board (handsaw, jigsaw, circular saw...).
Yes. As they are manufactured with light steel profiles with a high yield point they are very light and the load per column is very low. The only restriction is the storage load on the mezzanine: instead of 40.96lb/ft², it may be reduced to 1764lb for the whole mezzanine.
A home with a concrete structure usually supports a point load of at least 441lb on a surface of 2x2". The T8 mezzanine weighs 439lb and the T15 mezzanine weighs 785lb, both weights are distributed over 4 columns.
You can install either of these two metal mezzanines in your home, provided that the load stored on them is limited. Ask MezzaninesOnline about the specific features of your project.
You can do it yourself with the help of a friend. It is easily installed in a few hours, depending on the product. The times are a guideline and for assembly only. You need to add the time it takes to measure up, move the components to the location, clean up, etc.
S Range: 4-6 hours with 2 people
M Range: 8-10 hours with 2 people
L Range: 15-22 hours with 2 people
XL Range: 25-28 hours with 2 people
The time required for fitting accessories (ladders, handrails...) could vary between 2-8 hours depending on the quantity, as well as the type/model of accessory.
You can find an fitter near you on misterassembler.com. This website puts fitters and customers in contact, so the price and the responsibility of the installation is the fitter's. This website is not associated with MezzaninesOnline.
MezzaninesOnline can provide you with an estimate of the cost of assembly that depends largely on the distance between the assembly team and the installation site and the type of service hired (prior visit and measuring, delivery service and transport of goods to the site).
In any case, this estimate must be agreed between the client and the fitter.
The mezzanine floors are packed and shipped by an external agency in a lorry provided with a lifting platform, so that the boxes can be unloaded on the ground. The order will be delivered at street level to the address specified by the customer.
If there are access restrictions, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle.
In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer. Should you think there is any kind of restriction, please contact us. The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck does not have a back liftgate). We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.
At MezzaninesOnline, we offer four types of boxes that are carefully designed to adapt to and protect the products. Depending on the products in your order, you will receive one or the other.
Mezzanine floors in the S, M and L range are shipped in the same type of box. The S and M mezzanines require one crate for each shipment. The L range, however, normally requires two crates.
The XL mezzanines are shipped in two boxes; one for the wooden elements and one for the steel elements.
The rest of the products (stairs, handrails and other items) are shipped in smaller boxes.
Type of box |
Length (inch) |
Width (inch) |
Height (inch) |
Box for S, M and L |
94 |
44 1/2 |
21 1/2 |
Wooden XL Box |
150 |
47 1/2 |
28 |
Iron XL box |
96 1/2 |
39 |
29 |
Small items box |
92 1/2 |
12 1/2 |
9 |
*All mezzanine crates are shipped palletised.
Our logistics department packs the products with great care to optimise the space available inside the boxes. Sometimes, smaller products may share a box with mezzanines. In this way we make the most of the space and ensure that everything fits correctly.
Don't be alarmed by the total weight of the product, the components are light and manageable, so you can move them easily and take them up in the lift. The heaviest components are the primary beams from the L range (86 lb), the rest of the ranges are considerably lighter (26.5 lb). The floor panels are very light and fit in any lift. No component is more than 94 1/2" long and therefore, fits in most lifts.
However, it is important to mention that in the case of the XL range, some components may be a little heavier.
Sometimes, the carrier cannot access to point of delivery due to an extremely narrow street or any other difficulty. In such cases, the carrier cannot do the delivery with the usual truck and he may need to use a different vehicle or extra support.
If the carrier considers that the point of delivery is complicated, request a quotation. If you don’t inform in advance that the access is complicated, the delivery will be paralysed until you pay the extra cost.
Uno Hanging bracket is made of steel with a maximun load capacity of 220 lb load. Curved, stylish and simple, it can be installed in the two top holes of any of ours mezzanine beams (screws are included).
The ‘Z’ Stability Kit is a bracing system formed by several stabilizer bars that are placed in one of the sides of the mezzanine.
It is specially designed for those situations in which the mezzanine cannot be attached to any wall or the pillars cannot be fixed to the existing floor.
Stability kit
The two bars are great and work well, but if your deck is fully free standing I would advise you get two kits for full stability.
Report abuse