Messenger 
REDUCED SPACES
STRAIGHT STAIRS / SPIRAL STAIRS / VERTICAL STAIRS / BOAT LADDER / LATERAL STAIRS / JAPANESE / TRUCKLE BED / ALTERNATING TREAD STAIRS
EASILY ACCESIBLE STAIRS
STANDARD / STANDARD STAIRS WITH LANDING / PUBLIC ACCESS / GENERAL ACCESS /
FOLDING STAIRS
STANDARD / STANDARD STAIRS WITH LANDING / PUBLIC ACCESS / GENERAL ACCESS /
STAIR LANDING
Height: From 92" to 150"
Surface: From 75sq ft to 400sq ft
BEAM FOR INTERIOR STAIRS
Height: From 92" to 150"
Surface: From 75sq ft to 400sq ft
* All stairs can be installed outside our mezzanines
STANDARD
STANDARD / 4 TUBES / PANEL / ROPES / EXTENSIONS
SECURITY
PUBLIC ACCESS / SAFETY SKIRTING BOARD / WITH PLATE / SLAT RAILING WITH PLATE / EXTENSIONS /
LOW
LOFT BED / LOW
EXTENSIONS
LOADING GATES
SAFETY PALLET GATE / DOUBLE-HINGED GATE / DOUBLE-HINGED GATE WITH SAFETY ZONE
STAIRS
LATERAL STAIRS / FOLDING STAIRS TO WALL
* All railings can be installed outside our mezzanines
Please note! You may see extra products or the colour of your selection may not match the images shown. This is because we use real photos from our customers to maintain authenticity and transparency.
Zigzag stability column
Reference: 62300-N
Nobody has posted a review yet
$1,066.00 USD
Data sheet
62300-N
- Width (inch) (W)
- 43 1/2
- Fixation type
- Column fixation
- Range
- Large
- Compatibility
- Large
- Height (inch) (H)
- Regulable
- Kind of product
- Stability kits
- Material and finish
- Steel painted with powder coating
FAQs
General
Our technical team can facilitate you the task. Send us a sketch with your idea and we will develop 2d or 3d plans in order to see how it will be. Click here to contact us.
We do not currently offer an on-site measurement service. However, we recommend you explore the Mr Assembler website, where you can find assemblers who do offer this service. In addition, their platform allows you to hire an assembly service for the products you need.
You can make aesthetic modifications, but any structural modification non approved by Mezzanines Oniline will be under customer’s responsibility.
Installation
At least two adults are required to install a mezzanine, (they do not need to be DIY professionals). It is recommended to use safety equipment such as gloves, boots, etc., to avoid any accidents.
For the mezzanine floors in the L and XL range, a scaffolding or ladder system may be required for work at height and manual or electric lifting equipment for the primary beams, especially if the structure is over 3 m high. All other ranges are easily lifted by hand.
You will need the following tools to install the mezzanines: tape measure, a spanner set for nuts and bolts and a screwdriver (an electric screwdriver makes the job much easier), a spirit level, hammer, drill and a cutting tool for the board (handsaw, jigsaw, circular saw...).
Yes. As they are manufactured with light steel profiles with a high yield point they are very light and the load per column is very low. The only restriction is the storage load on the mezzanine: instead of 40.96lb/ft², it may be reduced to 1764lb for the whole mezzanine.
A home with a concrete structure usually supports a point load of at least 441lb on a surface of 2x2". The T8 mezzanine weighs 439lb and the T15 mezzanine weighs 785lb, both weights are distributed over 4 columns.
You can install either of these two metal mezzanines in your home, provided that the load stored on them is limited. Ask MezzaninesOnline about the specific features of your project.
You can do it yourself with the help of a friend. It is easily installed in a few hours, depending on the product. The times are a guideline and for assembly only. You need to add the time it takes to measure up, move the components to the location, clean up, etc.
S Range: 4-6 hours with 2 people
M Range: 8-10 hours with 2 people
L Range: 15-22 hours with 2 people
XL Range: 25-28 hours with 2 people
The time required for fitting accessories (ladders, handrails...) could vary between 2-8 hours depending on the quantity, as well as the type/model of accessory.
You can find an fitter near you on misterassembler.com. This website puts fitters and customers in contact, so the price and the responsibility of the installation is the fitter's. This website is not associated with MezzaninesOnline.
MezzaninesOnline can provide you with an estimate of the cost of assembly that depends largely on the distance between the assembly team and the installation site and the type of service hired (prior visit and measuring, delivery service and transport of goods to the site).
In any case, this estimate must be agreed between the client and the fitter.
Shipping
The mezzanine floors are packed and shipped by an external agency in a lorry provided with a lifting platform, so that the boxes can be unloaded on the ground. The order will be delivered at street level to the address specified by the customer.
If there are access restrictions, there could be additional costs due to the necessity of transferring the merchandise to a smaller vehicle.
In order to deliver mezzanines XL, the delivery location should be accessible to a truck/long trailer. Should you think there is any kind of restriction, please contact us. The customer should take care of the merchandise unloading process. That unloading should be made from the lateral sides of the truck (this kind of truck does not have a back liftgate). We deliver the product packed with pallets at the bottom, so its unloading should be made preferably with a forklift.
6 other products in the same category:
